Our RPL Kits are developed to assist in making valid assessment decisions whilst remaining compliant with training standards.

The RPL Kits are written for each qualification and include carefully designed documentation and simple instructions for evidence submission. The kit is designed to cover all units requirements with a range of appropriate assessment methods.

Our RPL Kit includes six steps:

Stage 1: An RPL Application Form and Information booklet for the candidate to complete that meets regulatory compliance, organisational and NCVER requirements.

Stage 2: Includes:

• A self assessment kit for candidates to assess their skills and knowledge
• Competency conversation kit for candidates to demonstrate their skills and explain their level of knowledge.
• Demonstration and observation kit with practical tasks, for candidates to provide additional evidence

This fulfills training package requirements and the collection of supporting documentation and evidence. The kit also includes instructions regarding evidence-gathering tasks (where applicable).

Stage 3: Third Party Kit, to be completed by an independent third party who is familiar with the candidate’s abilities in the workplace and who currently is (or has previously worked) in a supervisory position to the candidate. The third party person is asked to provide feedback on the candidate's skills and workplace performance.

Stage 4: The RPL Post Assessment Kit. This stage involves all the processes the Assessor and Registered Training Organisation (RTO) undertake to finalise the RPL assessment process for the candidate.

Stage 5: The RPL Trainer and Assessor Kit. This includes benchmarking information for trainers and assessors to enable them to make consistent evaluations of competence. It includes detailed instructions, procedures and recording tools to be used during the process.

Stage 6: Mapping Document. Questions, activities and tasks are mapped to the requirements of each unit of competency.

We provide all documents to you in Microsoft Word format, so you can easily customise them as required. You are free to rebrand and reproduce these within your registered training organisation (RTO). Our RPL Kits can be used for an unlimited number of students within your RTO. Don’t forget about our QUALITY ASSURANCE GUARANTEE!

RTOs purchase a license for their RTO only and are not permitted to share the documents with any other entity. Purchasers are asked to agree to a license agreement to this effect prior to purchase.

Core units
CPCCCM2012	Work safely at heights
CPCPCM2039	Carry out interactive workplace communication
CPCPCM2040	Read plans, calculate quantities and mark out materials
CPCPCM2041	Work effectively in the plumbing services sector
CPCPCM2043	Carry out WHS requirements
CPCPCM2045	Handle and store plumbing materials
CPCPCM2046	Use plumbing hand and power tools
CPCPCM2047	Carry out levelling
CPCPCM2048	Cut and join sheet metal
CPCPCM2054	Carry out simple concreting and rendering
CPCPCM2055	Work safely on roofs
CPCPCM3021	Flash penetrations through roofs and walls
CPCPCM3022	Weld polymer pipes using fusion method
CPCPCM3023	Fabricate and install non-ferrous pressure piping
CPCPCM3024	Prepare simple drawings
CPCPCM3025	Install trench support
CPCPDR2021	Locate and clear blockages
CPCPDR2025	Install stormwater and sub-soil drainage systems and drain work site
CPCPDR2026	Install prefabricated inspection openings and inspection chambers
CPCPDR3021	Plan layout and install below ground sanitary drainage systems
CPCPDR3023	Install on-site domestic wastewater treatment plants and disposal systems
CPCPFS3031	Fabricate and install fire hydrant and hose reel systems
CPCPGS3048	Install gas pressure control equipment
CPCPGS3049	Install gas appliance flues
CPCPGS3051	Purge consumer piping
CPCPGS3053	Disconnect and reconnect Type A gas appliances
CPCPGS3054	Calculate and install natural ventilation for Type A gas appliances
CPCPGS3056	Size and install consumer gas piping systems
CPCPGS3059	Install LPG storage of aggregate storage capacity up to 500 litres
CPCPGS3061	Install and commission Type A gas appliances
CPCPSN3011	Plan the layout of a residential sanitary plumbing system and fabricate and install sanitary stacks
CPCPSN3022	Install discharge pipes
CPCPWT3020	Connect and install storage tanks to a domestic water supply
CPCPWT3021	Set out and install water services
CPCPWT3022	Install and commission water heating systems and adjust controls and devices
CPCPWT3025	Install water pumpsets
CPCPWT3026	Install and fit off sanitary fixtures, water services and adjust water service controls
CPCPWT3027	Install backflow prevention devices
CPCPRF2023	Collect and store roof water
CPCPRF3022	Fabricate and install roof drainage systems
CPCPRF3023	Fabricate and install external flashings
CPCPRF3024	Install roof components
HLTAID011	Provide First Aid
Elective units
CPCCCM2008	Erect and dismantle restricted height scaffolding
CPCCCM3001	Operate elevated work platforms up to 11 metres
CPCPCM2049	Cut mild steel using oxy-LPG-acetylene equipment
CPCPCM2052	Weld mild steel using oxy-acetylene equipment
CPCPWT3024	Install and maintain domestic water treatment equipment
MEM11011	Undertake manual handling
MEM13015	Work safely and effectively in manufacturing and engineering
MEM16006	Organise and communicate information
CPCPCM2053	Weld using metal arc welding equipment
CPCPGS3046	Install LPG systems in caravans, mobile homes and mobile workplaces
CPCPGS3052	Maintain Type A gas appliance
CPCPGS3055	Install gas sub-meters
CPCPDR3025	Plan layout and install vacuum drainage systems
RIIWHS202E	Enter and work in confined spaces
RIICTT306E	Install cure in-place linings for existing pipeline systems
CPCCCM2008	Erect and dismantle restricted height scaffolding
CPCCCM3001	Operate elevated work platforms up to 11 metres
CPCPRF2022	Select and install roof sheeting and wall cladding
CPCPRF3021	Receive roofing materials
CPCPMS2021	Assemble mechanical services components
CPCPMS3031	Fabricate and install steel pressure piping
CPCPMS3032	Select and fit insulation and sheathing
CPCPMS3035	Install and test ducting systems
CPCPMS3036	Install air handling units
CPCPMS3038	Install air conditioning control equipment
CPCPMS3039	Maintain mechanical services equipment
CPCCWC2001	Complete penetrations and flashings
CPCCWHS2001	Apply WHS requirements, policies and procedures in the construction industry
UEERA0064	Recover, pressure test, evacuate, charge and leak test refrigerants - split systems
UEERA0059	Prepare and connect refrigerant tubing and fittings
UEERA0049	Install and start up single head split air conditioning and water heating heat pump systems
UEECD0007	Apply work health and safety regulations, codes and practices in the workplace
CPCPMS3041	Install domestic solid fuel burning appliances
CPCPMS3037	Install and commission a single head split system air conditioning

If you require RPL Kits with comprehensive benchmarking, please contact us for a quote.

• This qualification will include the pre-selected units as listed above.
• Upon request, we can develop additional elective units that are not currently listed.
• If you wish to make any elective changes, kindly reach out to us at info@caqa.com.au before placing your order.
• Please note that any elective changes involving units that are currently unavailable may result in additional charges to cover development costs.
• Please note that the quantity of units delivered will correspond to the number of units included in the training product on training.gov.au

For delivery timeframes on Pre-Order units and qualifications, please contact us at info@caqa.com.au or call us on 1800 266 160.